Audio Damage ADM07 MadHatter, DEMO UNIT
This item is used, has been fully tested and is guaranteed to be working.Shift Register Noise w/ Cymbal Synthesizer
As a digital noise source, Mad Hatter is, well, as versatile as a digital noise source can really be. The COLOR control and CV input is the clock speed of the shift register, from chaotic oscillations to white noise.
This noise is then paired with the oscillator stack, six square waves at frequencies measured from our own TR-606. (For added versatility, the COLOR knob also controls the pitch of two of those oscillators, sweeping them over a 1-octave range.) The oscillators run through a pair of bandpass filters, in the same manner as the TR-606's cymbal sound.
This whole mess goes to a high-pass filter, with a frequency controlled with the HPF FILTER FREQ knob and CV input. After that, it's out the out-hole to your favorite VCA, for easy-to-patch hi-hat and cymbal sounds.
The bottom knob and CV input, CROSSFADE, mixes from the audio input to 100% noise (at 12 o'clock) to 100% oscillators. The audio input is used for mixing in an external oscillator (or whatever) for patching a snare drum without a mixer.
In the Box
• The module itself
• Eurorack Power Cable