Slideshow Items
Black Code Source Expander
+12V | 16mA |
---|---|
-12V | 11mA |
+5V | 0mA |
Width | 6HP |
Depth | 25mm |
Black Code Source Expander
Erica Synths Black Code Source Expander takes the Code Source to the next level by adding auto-bend feature and more noise/CV modes.
Auto-bend provides a useful attack envelope for the internal clock generator's pitch and some outside CV control. This feature helps to quickly achieve authentic chip-tune percussion and old school electronic game sounds.
**Use the ribbon cable supplied with the module to connect the Expander to the Code Source! To connect the Expander you will need to remove the security jumper from the socket on the Code Source module. Pay close attention to the connector socket marking and do not mix it up with the PSU connector! The Code Source Expander will work only with the Code Source module and is not intended to work as a standalone module. Connecting PSU to the Expander will permanently damage it.
Features
• Auto-bend (attack) time control
• Auto-bend depth attenuverter
• Alternative mode switch
• Auto-bend envelope output
• Clock output
In the Box
• The module itself
• Eurorack Power Cable
Carousel items
You cart is currently empty