Intellijel 7U Performance Case, 84hp, SPECIAL ORDER
• Two 84 hp rows (6U) of Eurorack module space.
• One 84 hp row for our 1U modules.
• Threaded M3 strips for mounting modules.
• Solid plastic carrying handle.
• Anodized aluminum lid with latches, deep enough to close the case with cables patched in.
• Retractable feet that can support the case at two different angles. Or lay the case flat on a table.
• Plastic feet for resting the case on the table.
• Rubber feet on bottom side of lid so the case can stand vertically with the lid attached.
• Spring-loaded latching accessory slots on top and bottom of the case. The slots can be used to attach two cases together and for the carrying strap.
• Four 1/4" audio jacks that can be connected to the Audio I/O 1U. Two ins and two outs.
• MIDI In, Out, and Thru jacks. The In jack can be connected to the µMIDI 1U and will pass to the Thru. The Out is for future expansion.
• USB port that connects to the µMIDI 1U and other future modules.
• Rocker switch and barrel plug for power entry.
|Rows:||3-row (1 of which is 1U)|
|Total Usable HP:||252HP (84hp of which is 1U)|
|Power:||3A @+12v, 3A @-12v, 1.5A @+5v; 20 connectors|
|Lid:||Yes, patchable while closed|
|External Dimensions:||312mm x 165mm x 445mm (with lid), 312mm x 83mm x 445mm (without lid)|
|Screws:||M3, Not included|
|Screw Fixation:||Threaded strip|