soundmachines SY1 synesthesia
CV to DMX interface
Have you ever dreamed of controlling lights with your music? To change the hue of the backdrop of your live set against the VCF opening and closing? The frequency of the strobo to the LFO that triggers your buchlabongos©? Or the pan and tilt of a moving head projector to the pitch and envelope amount of your bassline? Either on stage or in your studio you can enjoy the contamination between aural and optical stimuli and feedbacking one through the other...
You can easily configure the module to control any DMX lighting device, more than one at a time!
The module has the capability to 'map' 5 CVins and 5 pots to several DMX channels, in different modes of operations.
The module is supplied with a programming cable (USB) that is used to configure (the config is stored in a non volatile memory) the aforementioned mapping, enabling te user to adapt to the venue's lighting setup and to the lighting fixture.
Every DMX product has its own mapping and it's normally found on the user's manual.
Given that we are very excited by contaminations, we thought about letting the module handle the LZX standards for CV in video synth setups (0-1V). There's a jumper on the back of the module that is provided for this task.
• The module itself
• Eurorack Power Cable
• Programming Cable (USB)