Digital Delay Module

The Synthesis Technology E580 resampling mini-delay emulates the classic sounds of digital, BBD and tape-based delays with 4 parameters under voltage control. Using a 40mhz DSP and 24-bit codec, the E580 recreates the pitch-shift modulating of BBD's with the variable bandwidth and noise floor without costly bbd IC's. In tape mode, wow & flutter, tape saturation and non-linear distortion model classic tape units without the bulk and maintenance. There are 2 simultaneous audio outputs: a straight delay and a variable tapped delay. The tap position is a percentage of the main delay time. this allows very short delays (<350us) as well as long delays (750ms). Both tap position (‘offset') and main delay time are voltage-controlled over a -5v to +5v range.

Controls
• Delay Time
• Wet/Dry
• Feedback
• Tap Offset
• Clean/BBD/Tape (Switch)

Inputs
• Audio
• Delay CV
• Mix CV
• Feedback CV
• Offset CV

Outputs
• Delay Out
• Tap Out

In the Box
• The module itself
• Eurorack Power Cable
• Manual