4ms ROW POWER 35 (White)
Clean, regulated, protected power solution for Eurorack systems
Row Power is a clean, regulated, and protected power solution for eurorack systems.
Row Power 35 provides 35W of power, suited for any typical eurorack row (84HP to 168HP):+firstname.lastname@example.orgA / -email@example.comA / firstname.lastname@example.orgA
Simply plug a universal power supply (laptop style) into either of the barrel plugs on the 4HP panel. Connect your modules via flying-bus cables or the Bus Stick. Daisy-chain multiple Row Powers to use a single power brick for multiple rows (typically 3-5 rows per power brick). Each row will be independently regulated and protected for ultra-low cross-talk between rows. Rows can also be hot-swapped (plugged/unplugged without powering the whole system down).
NOTE: While each Row Power has two headers on the back for connecting modules - flying bus cables and bus boards are sold separately. Power Brick 90W are sold separately as well.
In the Box
• The module itself
• 16-to-16 pin power cable, 2 M3 Knurlie screws